Design and Analysis of Jig & Fixture

R NAGENDRA BABU, B. BALOJI

Abstract


The Over the past century, manufacturing has made considerable progress. New machine tools, high performance cutting tools, and modern manufacturing processes enable today's industries to make parts faster and better than ever before. Although work holding methods have also advanced considerably, the basic principles of clamping and locating are still the same. Jigs and fixtures form an important category of equipment that goes a long way in achieving productivity. A jig, however, guides the cutting tool. A fixture references the cutting tool. The differentiation between these types of work holders is in their relation to the cutting tool. The main objective of using jigs in an industry is to achieve the Interchangeable Part Concept, and these are mainly used where production of goods is on large scale. The basic elements in the design of indexing type of drill jig is the component model, location, orientation and clamping. The scope of this paper is to design an indexing type of drill jig for a component having angular holes at 25 deg such the design is validated and verified. The present paper entitled “Design and Analysis of Indexing type of Drill Jig” is the work done for the design and analysis of Jig. Jigs are mainly used for mass production and for interchangeable parts concept, for a long period in the manufacturing of Jigs. Modeling is done using CREO Software and Analysis by using ANSYS



Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Edupedia Publications Pvt Ltd

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Publisher

EduPedia Publications Pvt Ltd, D/351, Prem Nanar-3, Suleman Nagar, Kirari, Nagloi, New Delhi PIN-Code 110086, India Through Phone Call us now: +919958037887 or +919557022047

All published Articles are Open Access at https://edupediapublications.org/journals/


Paper submission: editor@edupediapublications.com or edupediapublications@gmail.com

Editor-in-Chief       editor@edupediapublications.com

Mobile:                  +919557022047 & +919958037887

Websites   https://edupediapublications.org/journals/.

Journals Maintained and Hosted by

EduPedia Publications (P) Ltd in Association with Other Institutional Partners

http://edupediapublications.org/

Pen2Print and IJR are registered trademark of the Edupedia Publications Pvt Ltd.