Evaluation of Hammer Head Pier Cap Bridge Design

Medi. Apparao, D.Nagendra Babu

Abstract


The design of D-regions of reinforced concrete beams is the past was based on rules of thumb and past experience. Strut-and-Tie Modeling (STM) is an accepted design method to deal with these D-regions and also for B-regions. It simply idealizes the entire structures, or portions of the structure as a truss where steel bar is placed according to the locations of the tension members. This report is written to investigate the use of strut-and-tie modeling with AASHTO LRFD provisions to design bridge structure which includes the girder, hammerhead pier caps & pier. A brief background on STM, STM as Standard Design Provision, Euro Code 2 Provisions for STM & a guide to design with STM using AASHTO LRFD is discussed. Design examples of a bridge structure of step-by-step are performed using STM with AASHTO LRFD section 5.6.3 provisions and compared with conventional method. Design example of hammerhead pier cap is also performed according to EURO Code provision to show the difference with ASSHTO LRFD provision for STM. The strength of struts and nodes according to AASHTO was checked in this report. Conclusions and Recommendations based on the findings of this report are listed. The important findings provided with this work are a refined procedure to guide designers using STM. The findings of this work show that STM with AASHTO LRFD & EURO Code 2 provisions can be an applicable design method for both the D-region & B-region of structures. However certain criteria need to be met and the engineer needs to give special consideration to the geometry of their models, crack control and concrete strength.


Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Edupedia Publications Pvt Ltd

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Publisher

EduPedia Publications Pvt Ltd, D-351, Prem Nagar-2, Suleman Nagar, Kirari, Nagloi, New Delhi PIN-Code 110086, India Through Phone Call us now: +919958037887 or +919557022047

All published Articles are Open Access at https://edupediapublications.org/journals/


Paper submission: editor@edupediapublications.com or edupediapublications@gmail.com

Editor-in-Chief       editor@edupediapublications.com

Mobile:                  +919557022047 & +919958037887

Websites   https://edupediapublications.org/journals/.

Journals Maintained and Hosted by

EduPedia Publications (P) Ltd in Association with Other Institutional Partners

http://edupediapublications.org/

Pen2Print and IJR are registered trademark of the Edupedia Publications Pvt Ltd.